Table of Contents
This is an old revision of the document!
DataWedge Settings for COBI.wms
This guide explains how to configure a Zebra Android scanner so it sends scan data to COBI.wms.
Requirements
- Zebra Android device with DataWedge installed
- COBI.wms app installed (`de.cobi.wms`)
- Tested with DataWedge version 8.2
Create a new DataWedge profile
1. Open the DataWedge app.
2. Tap the ⋮ menu (top right) and select New Profile.
3. Enter a name, e.g., COBI.wms.
4. Open the newly created profile to edit it.
Link the profile to COBI.wms
1. Go to Associated apps.
2. Tap ⋮ → New app/activity.
3. In Select application, scroll to de.cobi.wms and select it.
4. In Select activity, choose the * entry.
Configure Barcode Input
You can enable/disable decoders in Decoders.
The following setting is required:
1. Go to Scan params.
2. Tap Code Id Type.
3. Select Code Id Type Aim.
Disable Keystroke Output
1. Open Keystroke output.
2. Uncheck Enabled.
Note:
If Keystroke Output is enabled, COBI.wms may receive duplicated scan data.
Enable and Configure Intent Output
1. Open Intent output.
2. Check Enabled.
3. Tap Intent action → enter:
de.cobi.wms.action.DATAWEDGE_BARCODE
4. Tap Intent delivery → select Broadcast intent.
