Differences

This shows you the differences between two versions of the page.

--- cobi.wms:datawedge_settings [2021/10/29 16:46] – tkammer
+++ cobi.wms:datawedge_settings [2025/08/19 13:23] (current) – [Enable and Configure Intent Output] thuth
@@ Line 1: / Line 1: @@
 ====== DataWedge Settings ======
+This guide explains how to configure a Zebra Android scanner so it sends scan data to COBI.wms.
-Android-based scanner devices from Zebra need to be configured to make the scanner send scan-data to COBI.wms.  This page describes how.
+==== Requirements ====
+  * Zebra Android device with DataWedge installed \\
+  * COBI.wms app installed \\
+  * Tested with DataWedge version 6.7 \\
-===== Adding a profile =====
-  - Open the App "DataWedge" on the Android devices
+==== Create a new DataWedge profile ====
-  - Click the three dots at the top right and select "New Profile"
+. Open the DataWedge app.  \\
-  - Name the profile however you like, for example "COBI.wms"
+. Tap the **⋮** menu (top right) and select New Profile.  \\
-  - Open the newly created profile to edit it
+. Enter a name, e.g., COBI.wms.  \\
+. Open the newly created profile to edit it.  \\
-===== Configuring the profile =====
+{{:playground:datawedge.png?200|{{:screenshots:datawedge_associate_app.png?400|Associating COBI.wms app}}
+{{:playground:screenshot_20250811-153332.png?200|}}
-The following settings have to be changed from the defaults.
+==== Link the profile to COBI.wms ====
+. Go to Associated apps. \\
+. Tap **⋮** → New app/activity. \\
+. In Select application, scroll to de.cobi.wms and select it. \\
+. In Select activity, choose the * entry.
-==== Applications ====
+{{:playground:screenshot_20250811-154647.png?200|}}
+{{:playground:screenshot_20250811-155655.png?200|}}
+{{:playground:screenshot_20250811-155027.png?200|}}
+{{:playground:screenshot_20250811-155149.png?200|}}
-The profile has to be associated with the COBI.wms Android app.
-  - Click on "Associated apps"
+==== Configure Barcode Input ====
-  - Click the three dots at the top right and select "New app/activity"
+You can enable/disable decoders in Decoders. \\
-  - In the "Select application" window, scroll down until you find "de.cobi.wms" and select it
+The following setting is required:
-  - In the "Select activity" window, select the "*" entry at the top
-==== Barcode input ====
+. Go to Scan params. \\
+. Tap Code Id Type. \\
+. Select Code Id Type Aim. \\
+{{:playground:screenshot_20250811-155932.png?200|}}
+{{:playground:screenshot_20250811-160040.png?200|}}
-In this part of the settings you can change scanning behavior.  For example, in the "Decoders" menu you can enable/disable different types of barcodes.
+==== Disable Keystroke Output ====
+. Open Keystroke output. \\
+. Uncheck Enabled. \\
-The following setting is required:
+{{:playground:screenshot_20250811-160155.png?200|}}
-  - Open the menu point "Scan params"
+{{:icons:warning.png?20}} **Note:**
-  - Click on "Code Id Type" at the top
+If Keystroke Output is enabled, COBI.wms may receive duplicated scan data.
-  - Select "Code Id Type Aim"
-==== Keystroke output ====
+----
-This setting has to be disabled.  Simply uncheck the "Enabled" checkbox.
+==== Enable and Configure Intent Output ====
+. Open Intent output. \\
+. Check Enabled. \\
+. Tap Intent action → enter:
+   de.cobi.wms.action.DATAWEDGE_BARCODE
+. Tap Intent delivery → select Broadcast intent. \\
-==== Intent output ====
+{{:playground:screenshot_20250811-160441.png?200|}}
-This setting has to be enabled and configured.
-  - Make sure that "Enabled" is checked
-  - Click on the menu point "Intent action"
-  - Enter the following text: ''de.cobi.wms.action.DATAWEDGE_BARCODE''
-  - Click on the menu point "Intent delivery"
-  - Select "Broadcast intent"
 ===== See also =====
   * https://techdocs.zebra.com/datawedge/8-2/guide/createprofile/