DataWedge Settings

This guide explains how to configure a Zebra Android scanner so it sends scan data to COBI.wms.

• Zebra Android device with DataWedge installed
  
• COBI.wms app installed
  
• Tested with DataWedge version 6.7
  

1. Open the DataWedge app.
2. Tap the ⋮ menu (top right) and select New Profile.
3. Enter a name, e.g., COBI.wms.
4. Open the newly created profile to edit it.

1. Go to Associated apps.
2. Tap ⋮ → New app/activity.
3. In Select application, scroll to de.cobi.wms and select it.
4. In Select activity, choose the * entry.

You can enable/disable decoders in Decoders.
The following setting is required:

1. Go to Scan params.
2. Tap Code Id Type.
3. Select Code Id Type Aim.

1. Open Keystroke output.
2. Uncheck Enabled.

Note: If Keystroke Output is enabled, COBI.wms may receive duplicated scan data.

1. Open Intent output.
2. Check Enabled.
3. Tap Intent action → enter:

 de.cobi.wms.action.DATAWEDGE_BARCODE

4. Tap Intent delivery → select Broadcast intent.

• https://techdocs.zebra.com/datawedge/8-2/guide/createprofile/